'----------------------------------------------------------------
'SHOPBOT ROUTER FILE IN MM
'GENERATED BY PARTWorks
'Minimum extent in X = 0.000 Minimum extent in Y = 0.000 Minimum extent in Z = -15.000
'Maximum extent in X = 2400.000 Maximum extent in Y = 1200.000 Maximum extent in Z = 0.000
'Length of material in X = 2400.000
'Length of material in Y = 1200.000
'Depth of material in Z = 15.000
'Home Position Information = Bottom Left Corner, Material Surface 
'Home X = 0.000000 Home Y = 0.000000 Home Z = 20.000000
'Rapid clearance gap or Safe Z = 6.000
'UNITS:MM
'
IF %(25)=0 THEN GOTO UNIT_ERROR	'check to see software is set to standard
SA                             	'Set program to absolute coordinate mode
CN, 90
'New Path
'Toolpath Name = Drill 1
'Tool Name   = 1/4" Straight  (48-005)

&PWSafeZ = 6.000
&PWZorigin = Material Surface
&PWMaterial = 15.000
'&ToolName = "1/4" Straight  (48-005)"
&Tool =2                    'Jog Z axis to safe height
C9
TR,11000
C6                   'Return tool to home in x and y
PAUSE 2
'
MS,101.2,25.3
JZ,20.000000
J2,0.000000,0.000000
J3,22.632000,19.049000,6.000000
M3,22.632000,19.049000,-5.000000
J3,22.632000,19.049000,6.000000
J3,69.537003,261.399994,6.000000
M3,69.537003,261.399994,-5.000000
J3,69.537003,261.399994,6.000000
J3,366.316010,588.864990,6.000000
M3,366.316010,588.864990,-5.000000
J3,366.316010,588.864990,6.000000
J3,663.044006,274.683014,6.000000
M3,663.044006,274.683014,-5.000000
J3,663.044006,274.683014,6.000000
J3,832.353027,49.955002,6.000000
M3,832.353027,49.955002,-5.000000
J3,832.353027,49.955002,6.000000
J3,748.570984,827.992004,6.000000
M3,748.570984,827.992004,-5.000000
J3,748.570984,827.992004,6.000000
J3,833.224976,1115.991943,6.000000
M3,833.224976,1115.991943,-5.000000
J3,833.224976,1115.991943,6.000000
J3,62.606998,1117.737061,6.000000
M3,62.606998,1117.737061,-5.000000
J3,62.606998,1117.737061,6.000000
JZ,20.000000
J2,0.000000,0.000000
'
'Turning router OFF
C7
END
'
'
UNIT_ERROR:
CN, 91                            'Run file explaining unit error
END